HDMI 1.3 TYPE A (STANDARD) TO TYPE C
(MINI) CABLE
Connect camcorders, digital cameras and
other devices that utilizes type C (mini
HDMI) connection to displays with a stan-
dard HDMI (type A) port. Provides the
perfect transfer of digital audio & video
signals from your portable digital devices
to your HDTV, monitors, A/V receivers.
Supports 1080P resolution.
No. 45-7441
1 meter (3.28’)
No. 45-7442
2 meter (6.56’)
No. 45-7443
3 meter (9.84’)
RIGHT ANGLE HDMI 1.3 CABLE
Unique design right angle HDMI male connector swivel 180° on one
end and a straight HDMI male connector on the other end. Perfect for
installations where space or clearance behind components is limited.
No. 45-7531
1 meter (3.28’)
No. 45-7532
2 meter (6.56’)
No. 45-7533
3 meter (9.84’)
DISPLAYPORT CABLE
DisplayPort connections are the next
generation digital display interface
standard design to replace DVI,
LVDS and eventually VGA.
DisplayPort delivers higher perform-
ance, enables new monitor designs
and improved digital display connec-
tivity. DisplayPort delivers High-
Definition and provides both digital
video and audio in one cable, pro-
vides up to 1080P resolution and
supports HDCP (High-Definition
Content Protection). Smaller connec-
tor foot print than either DVI or VGA.
No. 45-7506
6 Ft.
No. 45-7512
12 Ft.
HDMI RIGHT ANGLE ADAPTOR
Right angle HDMI Male to Female, 6 inch cable, 30 AWG wire,
HDMI High - Speed with Ethernet.
No. 45-7036
No. 45-7037
45-7037
45-7036
HDMI Male
Connector
HDMI
TM
& DISPLAYPORT CABLES & TESTERS
PHILMORE 45-200 HDMI INSTALLERS CABLE
TESTER
The Philmore no. 45-200 HDMI Remote Cable Tester
has been designed for installers! Allows easy "pre-testing" of HDMI cables
at the "rough wire" stage of installing, and again after the HDMI cable is
installed. Know that your HDMI cable installation is working before the
walls are "closed" and before there is power or equipment at the Job Site.
The Philmore 45-200 is designed to quickly test and troubleshoot any stan-
dard HDMI 1.2v or 1.3v cable. Inside the HDMI interface cable there are 9
complete circuits and the 45-200 HDMI tester selectively measures each
sub circuit within the tester and displays a pass/fail by way of LED's on the
top of the receiver. The 45-200 HDMI cable tester may also be used to test
DVI cable assemblies; simply use a DVI to HDMI adapter(s) (not included).
Main unit requires two AA batteries (not included).
PHILMORE 45-100 HDMI
CABLE TESTER
The Philmore 45-100 is designed to quickly test and troubleshoot
standard HDMI 1.2v & 1.3v cables. There are 19 wires present
inside the HDMI interface cable, and 9 complete circuits which
the 45-100 HDMI tester checks and reports to the user via a
pass/fail series of LED's on the top of the unit. The perfect addi-
tion to your test bench.
The model 45-100 Tester is intended for in-store use for assuring
that all internal cable connections are wired correctly. The cable
tester may also be used to test DVI cable assemblies: simply use
a DVI to HDMI adapter (not included). Requires one 9 Volt battery
(not included).
No. 45-100 - HDMI Cable Tester
Tests Cables:
HDMI A Male to A Male
HDMI C Male to C Male
HDMI A Male to C Male
Note: Unit Can Not Test Cables with a Built-In Repeater
Cable identification/testing:
Data Red, Blue, Green
Streaming digital for Red, Blue, and Green with multiplexed sound
Clock.
Master clock for multiplexing with Red, Blue, Green and sound data
CEC.
Consumer Electronics Control
I²C Clock
Serial Port Timing Output supporting HDCP
I²C Data
Serial Data for HDCP, EDID
+5 Volts
System Supply Voltage and Standby
Hot Plug
Announces presence of HDMI Source
No. 45-200 - Installers HDMI Cable Tester
86
OFC...,76,77,78,79,80,81,82,83,84,85 87,88,89,90,91,92,93,94,95,96,...352