CANOPY WALL PLATE
(Removable & Reversible)
The Canopy Wall Plate is intended for use in situations where installing preassembled cables with molded - on connectors is mandatory. Cables
such as HDMI, VGA, S-VHS and so forth can be fed through walls so that they will extend through Canopy Wall Plate. New design will allow installers
to remove the canopy portion of the wall plate to allow larger connectors to pass through. Multiple cables can also be fed through at the same time.
Available in four different styles and colors.
DECORATOR
SINGLE GANG
STANDARD
SINGLE GANG
RAISED
DOUBLE GANG
STANDARD
Canopy opening
Decorator style:
A = 1.10”
B = 1.25”
Single gang standard: A = 1.25”
B = 1.0”
Single gang raised:
A = 1.20”
B = 1.30”
Double gang standard A = 2.90”
B = 1.30”
A
B
Canopy may be removed / reversed for new
connectors if necessary.
With the back of wall plate fac-
ing you, hold the plate as
shown in the illustration. With
a finger putting a little pressure
on the canopy from behind,
pushing it toward your face.
Flex (bend) the wall plate firmly
until the canopy pops out.
Apply the canopy to the back
of the plate as shown. Insert
canopy tabs first and then
rotate canopy into place.
Flexing wall plate and pressing
together until the canopy seats
on the plate. It will be obvious
when the canopy has snapped
firmly into place.
Decorator:
No. 75-1101 - White
No. 75-1103 - Ivory
Single Standard:
No. 75-1111 - White
No. 75-1113 - Ivory
No. 75-1115 - Black
No. 75-1117 - Almond
Double standard:
No. 75-1121 - White
No. 75-1123 - Ivory
No. 75-1125 - Black
No. 75-1127 - Almond
Single raised:
No. 75-1131 - White
No. 75-1133 - Ivory
No. 75-1135 - Black
No. 75-1137 - Almond
Illustration by:
REMOVED CANOPY
REVERSED CANOPY
SPECIALTY WALL PLATES
95
OFC...,85,86,87,88,89,90,91,92,93,94 96,97,98,99,100,101,102,103,104,105,...352