117
MICROPHONES & CABLES
Electrical specifications for
Omni-Directionals:
Frequency Response
: 40-16,000 HZ
Sensitivity:
-64 + 3db.
Impedance:
600 ohms
Designed to be inconspicuous, these microphones can be worn like a tie-clip, on the lapel, suspender or even concealed by a corsage. Typical
uses are with a pocket-sized tape or digital recorder, FM transmitter during interviews, for news report recording or in a classroom. Highly depend-
able, durable and designed to eliminate background noises while still being very sensitive to sounds in the immediate vicinity.
Two types available: Uni-directional and Omni-directional, both stereo microphones with standard (3.5mm dia.) phone plugs. Use the Uni-direc-
tional type when wanting to keep left/right as much separated as possible; recording person on both left and right. Use the Omni-directional
when you want a natural sounding stereo sound and wish to have pick up from as wide an area as possible. Separation is sharp and clear on
playback.
Part no. CM57
…..uni-directional Stereo Lapel Microphone, Imp. 680 ohms. Sensitivity: -46 ~54dB, S/N ratio >58dB, with 1 meter cord and
3.5mm stereo plug.
Part no. CM58
…..omni-directional Stereo Lapel Microphone, Imp. 1.5Kohms, Sensitivity –42 ~ 46 dB, S/N ratio >60 dB, with 1 meter cord and
3.5mm stereo plug
.
Tie-clasp Microphones
No. CM57
No. CM58
OMNI-DIRECTIONALS
(Condenser Cartridge Type)
No. EM300 -
All new version of the popular tie clasp mir-
cophone has pickup element and amplifier built into tie clasp
housing. The battery (easy to find, 1.5V AA) is minated with
3.5mm plug which plugs into battery housing. Unit is not
supplied with battery.
The
No. EM300
is packaged on an attractive display card.
BALANCED CABLES
Cables with a 3-pin XLR
connector on each end,
male to female, for use with
balance amplifiers. For any
MediaStar microphone.
UNBALANCED
CABLES
Cables with 3-pin XLR
female on one end, 1/4”
phone plug on the other.
LAPEL CRYSTAL MICROPHONE
A low-priced replacement microphone for PA amplifiers, cassette and open
reel portable tape recorders. With approximately 3 ft. shielded cable. Lapel
microphone is equipped with molded 3.5mm plug. A clip is provided to
assure firm attachment on the lapel. A sensitive
high impedance cartridge reproduces crisp clean
sounds. Simply plug 3.5mm plug into “mic” jack
on amplifier or recording equipment.
Frequency Response:
70-8,000 Hz
Sensitivity:
-50 db
Size:
1-1/2” dia. x 1/2”
TAPE RECORDER MICROPHONE
REPLACEMENT for MOST PORTABLE RECORDERS
Low impedance, dynamic “mic” with
dual plugs, (3.5mm and 2.5mm) for
any tape recorder input. With
remote ON-OFF switch, desk stand,
approx. 3-1/2 ft. cord, 200 ohm
impedance for excellent speech and
music reproduction. Will improve
recording quality on any low-cost recorder with
built-in microphone.
NO. RC1
NO. LM101S
No. EM300
Number
Cable Description
71-1570
6 ft. length cable, 3-pin XLR Male to Female
71-1573
12 ft. length cable, 3-pin XLR Male to Female
71-1575
17 ft. length cable, 3-pin XLR Male to Female
71-1577
25 ft. length cable, 3-pin XLR Male to Female
71-1580
50 ft. length cable, 3-pin XLR Male to Female
Number
Cable Description
71-1590
6 ft. XLR F to 1/4” Male phone plug cable
71-1592
12 ft. XLR F to 1/4”Male phone plug cable
71-1593
17 ft. XLR F to 1/4” Male phone plug cable
OFC...,107,108,109,110,111,112,113,114,115,116 118,119,120,121,122,123,124,125,126,127,...352