MICROPHONE
ACCESSORIES
FLANGE-STYLE MICROPHONE MOUNTS
Designed for mounting on a table top, side wall etc., will accommo-
date a gooseneck or microphone extension pipe. Made for use as a
permanent mount. The larger diameter is suggested for better
strength if use will be constant and rigorous. Chrome plated finish;
5/8-27” standard threads.
No. 71-4001
- 1-3/4” diameter, male threads
No. 71-4005
- 2-3/4” diameter, male threads
No. 71-4007
- 2-3/4” diameter, female threads
71-4001
71-4005
71-4007
MIKE PIPE
Use with the flange mounts
(No. 71-4007) with bases for
table microphone stands etc..
The 3” “pipe” is chrome plat-
ed, threaded on each end with standard 5/8”-27 threads to mate with
standard microphone holders and bases. Included is a star nut that can
be used to tighten the pipe against a mike holder, prevents loosening.
No. 71-4010
………….
3” Mike Pipe
MICROPHONE HOLDER ADAPTORS
Microphone holders and stands are supplied with one
of two different size threads. The 5/8” -27 size is one
and 3/8”-17 is the other. If you have a mike holder of
one size and a stand with the other, you’ll need an
adaptor to use them together. One of these small
adaptors will solve the problem; road groups should
carry a few of each.
Part no.
Description
No. 71-4015
-
3/8”-17 female to 5/8”-27 male
No.71-4016
-
5/8-27 female to 3/8” -17 male
71-4015
71-4016
MICROPHONE GOOSENECKS
Flexible “gooseneck” may be used with Flange mounts, Table top
mounts or on top of a floor microphone stand. Provides quick, easy
repositioning of the microphone. Available in two lengths and in
standard chrome or dull, non-reflective black. Male one end, female
on the other.
No. 71-4030
-
6” length Gooseneck, black
No. 71-4031
-
6” length Gooseneck, chrome
No. 71-4040 -
13” length Gooseneck, black
No. 71-4041
-
13” length Gooseneck, chrome
ADD - ON MICROPHONE BOOM
This is a handy accessory for use with microphone floor stands in
this section. An adjustable boom that can accommodate a second
microphone for an instrument, other vocalists etc., or simply to hold
a set of stereo microphones on one stand and boom. The 32” long
boom may be adjusted and tightened “in” or “out” as well as angled
up or down to any useful angle.
The boom shaft has a standard 5/8”-27 thread to accommodate
standard microphone holders. Positive-locking cam for quick, quiet
adjustments. The boom is available in conventional chrome plating
or in dull black (non-reflective) finish to match microphone floor
stands on this page.
No. 71-4666
. ……...
Microphone Boom, Chrome
No. 71-4667
……….
Microphone Boom, Black
Holds microphone firmly - No Compromise.
Slide in any microphone having a 3/4” to 1-
1/4” diameter handle. This black holder is
sharp looking with all microphones. Firm swiv-
el adaptor tilts through 180 degrees. Has
standard 5/8” - 27 threads.
UNIVERSAL MICROPHONE HOLDERS
This adjustable microphone holder
adapts to the bodies of microphones
from small cassette types to larger
professionals. A squeeze of the han-
dle, and the holder grips the micro-
phone with a secure grooved ridge
contact. Accommodates microphone
handles from 5/8” to 1-3/8” diameter.
Tilts a full 180 degrees. Standard
microphone stand fittings, 5/8” - 27
threads.
No. SM70
No. SM85
121
MICROPHONE HOLDER
OFC...,111,112,113,114,115,116,117,118,119,120 122,123,124,125,126,127,128,129,130,131,...352