Fuse Mounting Bases
No. H108A
- Single Fuse
No. H108B
- Double Fuse
Will accommodate the
3AG cartridge type auto fuse. Clips are
made of spring brass, and mounting
board is made of 1/8” XP laminated
phenolic insulating material.
Automotive Power Cord
No. TC3640
5 ft.; 16 Ga. red and
black leads with fuse
holder in-line in red
lead with 10 amp fuse.
Both ends stripped.
CB & AUTOMOTIVE ACCESSORIES
COMMUNICATION DYNAMIC MICROPHONE
for CB and Amateur Applications
S.W.R. Bridge and Field Strength Meter
REPLACEMENT SCREWS
for CB’s, PA’s, Car Mounts, etc.
MICROPHONE
HANG-UP
HOLDER
with mounting
hardware
Stainless Steel
No. H200SS
No. H200SSB
bulk packed
Everyone can now enjoy a micro-
phone with superior specifications at
a moderate price. Features four (4)
conductors, (1 shielded), in a 6-ft.
coiled cable designed for relay or
electronic switching in transmitters,
transceivers and PA amplifiers.
Full size, press-to-talk switch extends
over half the length of this hand-held
mike. High impact shockproof case is
attractively styled in matte finish mid-
night black. Supplied with rear hang-
er button.
Perfect dual-purpose
meter for checking
SWR measurements,
as well as reading the
field strength in both
mobile and home sta-
tion rigs. Can monitor
transmitter outputs in
the circuit continuously.
Specifications:
Directivity:
Omni - Directional
Sensitivity:
-72dB ± 4db at 1KHz
Frequency Response: 200Hz - 5KHz
Specifications:
SWR:
1:1 to 1:3
RF Power:
0.5-10W and 0.5-100W Switchable
Accuracy:
SWR: +-5%
Power:
+-10%
Impedance:
52 ohms
Meter Sensitivity:
200 u A
Freq. Range:
1.7 to 150 MHz
Size:
5-3/4”H x 2-1/4”D x 1-15/16”
Attractive black metal cabinet supplied
with detachable antenna, and set of instructions.
For connecting mounting brackets
to metal cases. Made of machined
brass with a heavy nickel plated fin-
ish. Length of threaded portion is
3/8”. Packed two per package.
Add suffix “B” to part number for
bulk pack.
No. FS45
In-Line Fuse
Holder
for Blade Type
Fuses
No. FH101
• Material
- Bakelite
• Max. Rating:
250VAC/30A
• Color
- Black
In-Line Fuse Holder
No. FH65
No. FH65B
-
bulk packaged
Holds 1/4” x 1-1/4” fuses. Spring loaded, twist lock
design. Plastic housing provides full insulation. 10”
heavy duty #18 gauge stranded insulated wire at each
end.
Screw Cap Fuse Holder
No. FH55
No. FH55B
-
bulk packaged
Rating 15A @ 250VAC
Holds 1/4” x 1-1/4” fuses. Can be
used in panels up to 1/4” thick.
Mounts in 19/32” hole. Overall length of
holder 2”, behind panel 1-3/8”.
FUSE HOLDER (Screw Type Cap)
No. 526 -
For 3 AG Type Fuse (1/4” x 1-1/4”)
No. 525 -
For GMA Type Fuse (5mm x 20mm)
Heavy Duty In-Line
Fuse Holder
10A @ 250V AC
No. 506
-
for 3AG type fuse
(1/4” x 1-1/4”)
No. 507
-
for GMA type fuse
(5.0mm x 20mm)
No. K40
Size 4 mm
No. K50
Size 5 mm
No. K60
Size 6 mm
No. CM43A
SMA TO UHF HT ADAPTOR CABLE
For hand-held Ham or Business Transceivers (HT) with SMA antenna
connectors; adapts the antenna connection to a UHF female for connec-
tion to mobile or base antennas with a PL-259 termination. The cable is
16” long miniature 50 ohm coaxial cable (RG174/U). Using an adaptor
cable will help to reduce strain on the radio’s SMA antenna jac
k.
No. CA740
GRAIN of WHEAT BULBS
Subminiature lamps used in many automotive units including
tape players, CB radios etc. These are supplied with an 8-3/4”
lead wire.
No. 480
-
12 Volt, 75mA
No. 480B
-
bulk packaged
No. 495
-
14 Volt, 80mA
No. 495B
-
bulk packaged
149
OFC...,139,140,141,142,143,144,145,146,147,148 150,151,152,153,154,155,156,157,158,159,...352