AUTOMOTIVE ACCESSORIES
Ground Loop Isolator
No. 64-4005
The Philmore ground loop isolator is a
low level filter which isolates the
ground between amplifier and radio. It
eliminates the ground path which can
cause alternator whine and ignition
pop. The 64-4005 is equipped with two
RCA Females for interconnection with
cable adaptor / components. The all
metal case will give additional shielding
and create better isolation between the
head unit and amplifier.
No. 64-4015
Effectively balances the low
impedance of your car radio /
stereo to adapt to the higher
impedance of your high powered
car amplifier. Protects your car
radio by loading the output while
balancing to your amplifier’s input.
For low powered car radio .5 watts
per channel.
High / Low Impedance Adaptor
Nissan to Motorola Adaptor
No. 64-3030
Converts the plug on antenna cable in newer Nissan vehi-
cles to standard size Motorola plug for connection to a
radio having a standard Motorola jack.
Volkswagen to Motorola Adaptor
No. 64-3050
This shielded adaptor cable converts the
Volkswagen/ Audi flat antenna plug to a
standard Motorola antenna jack. It has
Volkswagen/Audi antenna jack on one end
and a standard Motorola antenna plug on
the other.
This shielded adaptor converts a stan-
dard size Motorola plug to the
Volkswagen/Audi antenna jack. It has
Volkswagen/Audi antenna plug on one
end and a standard Motorola antenna
jack on the other.
No. 64-3045
Motorola to Volkswagen Adaptor
Signal Noise Eliminator &
Adjustable Output Reducer
No. 64-4010
The 64-4010 converts car stereo speaker outputs to Pre-Amp level for input to a separate amplifier. It is
used to add an amplifier to a stereo with 2 to 40 watts of power per channel. The 64-4010 output chan-
nels are independently adjustable from zero output to 1200mv or higher. This product will adapt any
stereo, even those with floating or bridged output, to preamp level for input to an amplifier or equalizer /
booster-amplifier with RCA connector inputs. The 2 RCA jacks are 24 Karat Gold plated. The line output
converter also isolates stereo output and ground for noise elimination; PLUS it is fader compatible.
* Use with stereo having a maximum of 40 watts of power per channel.
No. 64-4020
The 64-4020 converts car stereo speaker output to preamp level for input to separate amplifier. It is used
to add an amplifier to a stereo with 9 - 15 watts of power per channel--up to 30 total watts. This product
will adapt any stereo, even those with floating or bridged output, to Pre-Amp level for input to amplifier or
equalizer / booster-amplifiers with RCA connector inputs. It also isolates stereo output and ground for
noise elimination. No. 64-4020 is metal shielded to prevent radiated noise interference. Stereo output
reduction ratio is 10:1. The 2 RCA plugs are 24 Karat Gold plated.
* Use with stereo having 9 -15 watts of power per channel.
Noise Eliminator &
Fixed Output Reducer
152
OFC...,142,143,144,145,146,147,148,149,150,151 153,154,155,156,157,158,159,160,161,162,...352