SWITCHES
AUTOMOTIVE & MARINE
Electrical Rating:
SPST snap action toggle.
Rated at 12-14 volts DC, 20 amps.
Terminals: .250” push-on terminals or solder.
Mounting hole: 1/2” diameter round.
Metal actuator 1 1/16” length
Construction: polycarbonate UL94-1 rating
Stylish Automotive
TOGGLE SWITCH
with LED
Brushed and tapered bat handle gives
this switch a “classy” look; perfect for cus-
tom dash. LED (red) lights to indicate
power is “on”. The 20 amp rating is plenty
for many automotive accessories.
Terminals accept standard .250” push-on terminals or may be sol-
dered.
This is a three terminal switch with one connection for ground
which is needed to light the LED.
Part No.
Circuit Type
30-12180 ON - OFF SPST
Electrical Rating:
SPST or SPDT snap action toggle
Rated: 12-14 volts DC 20 amps.
Terminals: accept .250” push-on terminals.
Mounting hole: rectangular .60 X 1.450 (+/-
.004”) hole in panels up to .050” thickness.
“Surf and Turf”
GUARDIAN SWITCHES
The Guardian series is dust
and moisture resistant,
designed for use in a marine
environment or dusty equip-
ment such as construction
equipment, off-road vehicles
and farm equipment. This is
a tough switch and designed to
meet or exceed IP66 require-
ments. Snap-in mounting requires
a rectangular cut-out
Part No.
Rocker Color
Action
no. of
Type
Terminals
30-12280
Black/Black
ON-OFF
2
SPST
30-12281
Black/Red Dep.
ON-OFF
3
SPST
30-12282
Black/Black
ON-OFF-ON 3
SPDT
30-12284
Black/Black
(ON)-OFF-(ON)
3
SPDT
Auto Alarm Style
MINIATURE TOGGLE
SWITCH
A switch often used by alarm
installers to set/un-set alarm sys-
tems; mounting is typically under
or in the dash. The alarm switch
comes with an attached “pigtail”
that is 24” long, red and black
insulated, stranded 20 gauge wire.
Rated at 6 amps at 12-14 VDC, this ON-OFF SPST switch could
easily be used for any number of appliances, as well as for arming
alarms. Included is a miniature escutcheon plate with the legends
ON and OFF. Mount hole: 1/4” diameter round.
No. 30-10005
MODULAR PANELS
(Switch Brackets)
Modular panels, or switch mounting brack-
ets, permit mixing of switch types and easy
mounting of switches in general. Two brack-
ets will accommodate switches that need
either round or rectangular holes.
Part No.
Description
30-12575
for switches needing a 1/2” X 1” rectangular hole
30-12585
for switches needing a 1/2” dia. round hole
Big PUSH-BUTTON SWITCH
(HORN SWITCH)
Surface mounting switch commonly used for
fog-horn or siren. Momentary action, horn will
sound only as long as button is depressed.
The switch is designed for typical mobile and
marine 12-14 volt DC applications.
The actuator is black plastic button, and the frame is chrome plat-
ed brass construction. Overall length is 2-5/8” by 1-1/2”. Rated at
5 Amps 12-14 VDC. SPST, (ON)-OFF
No. 30-12465
Extra Heavy Duty
PUSH BUTTON (Starter) SWITCH
WITH WEATHER-BOOT NUT
A heavy-duty (50 amps) push-button momen-
tary switch that is dust and moisture resistant;
rubber boot-nut is included for enhanced pro-
tection. Contacts are silver/copper for long life.
Electrical and mechanical
5/8” x 32 mounting bushing, panels up to 1/2”
thickness.
SPST Momentary action, (ON)-OFF
Screw Terminals (X2)
Rated 50 amps @ 12-14 VDC
Rubber dust boot/nut included.
No. 30-12475
Mounting Center 2 1/16”
* ( ) = Momentary
* ( ) = Momentary
Note: ( ) = Momentary
176
OFC...,166,167,168,169,170,171,172,173,174,175 177,178,179,180,181,182,183,184,185,186,...352