Basic HTML Version

279

Sub-miniature snap-in panel lamps press-fit into a 0.173” diameter hole. Uses the

industry standard T1 size LED. Lead wires are 6” long, (26 Ga.), stripped .380” on

ends (red and black insulation indicates polarity). The 2 volt values are regular

LED’s, use a resistor for voltages that are higher than 2 volts; package includes

“how to” calculate resistor values.

Standard (T1-3/4) and miniature size (T1) LED’s mounted in durable nylon cases and ready to speed mount and

eliminate additional mounts and parts. Time saving with faster installation; drill a hole and snap-in. Select from sever-

al popular voltages that reduce assembly time and the need for extraneous parts. LED’s are generally very long life

devices and may never need replacing in many applications.

2 Volt Snap-In T1 LED LAMPS for .173” diameter mounting holes

Part No.

Voltage

Description

Terminals

11-2400

2-volt

RED

6” stripped leads

11-2402

2-volt

AMBER

6” stripped leads

11-2406

2-volt

GREEN

6” stripped leads

6” Stripped Leads

DC Volts

5V

6V

12V

24V

Resistor (ohms)

150

180

470

1200

AC Volts

6V

12V

24V

48V 117V

Resistor (ohms)

82

220

560

1200 3K

Typical voltages used in electronics and resistor values (rounded to nearest standard resistor).

How to use a 2 Volt LED Lamp Assembly

A 2 volt LED may be used with practically any higher voltage, simply calculate the value of resistor to use in series with the LED.

For DC Circuits:

Subtract two volts (needed

for the LED) from your circuit voltage and mul-

tiply by 50. EXAMPLE: For a 12VDC circuit,

subtract the “two” and multiply the answer ten

times fifty. So a 500ohm resistor is needed

(use a close standard value, such as 470 or

520 etc.)

For AC Circuits:

Place a diode in series with

the LED. Then, take your circuit voltage and

subtract 2.7 from that voltage and then multi-

ply the answer by 25. Example: In a 28 volt

circuit, subtract 2.7 which gives you 25.3.

Then multiply the 25.3 times 25 and the

answer is 632 ohms. Use a close resistor

value such as 680 ohms.

2 Volt LED Panel Lamp for 1/4” hole size. Considered the “universal” type as it can be

used with virtually any DC voltage with a resistor (package shows how to determine

resistor value). And it can be used with AC voltages with a diode and resistor. The

lamp has 6” long wire lead set (black / red), which is stripped and tinned, ready to sol-

der. Body color black (nylon).

2 Volt Snap-In LED LAMPS for .250” diameter mounting holes

Part No.

Voltage

Description

Terminals

11-2410

2-volt

RED

6” stripped leads

11-2412

2-volt

AMBER

6” stripped leads

11-2414

2-volt

GREEN

6” stripped leads

6” Stripped Leads

PANEL LAMPS & INDICATOR LIGHTS

LED