TELEPHONE
“66” STYLE BLOCKS & ACCESSORIES
Low Voltage Wall Plate Bracket
This bracket is designed for ALL Low
Voltage applications. It fits into
NEW
CONSTRUCTION by attaching it to a
stud, dry walling over the bracket, and
then the wall plate is mounted on this
bracket.
Retrofit Low Voltage Wall Plate Bracket
This bracket is designed for ALL Low
Voltage applications. It fits into EXISTING
CONSTRUCTION by cutting a hole in the
wall and bending the tabs securing the
bracket. Then the wall plate is mounted on
this bracket.
“66” Style Blocks
The Philmore “66” Blocks and accessories are fully compatible with all industry stan-
dards. These blocks have 100 contacts which are divided into 50 pairs. The spacing
is CAT5 spacing. The “66” Block provides an economical solution for terminating our
network cable. These blocks are used in Telephone installations as well as
Networking installations.
“66” Block Standoff Mounting Bracket
With these mounting brackets it is easy to make a clean, efficient, and space-saving
installation. They are designed so that the installer may lay the cable before the block is
snapped into position. The Philmore mounting bracket is compatible with all industry
standard “66” blocks. They will accommodate one (1) 6650 block or two (2) 6625
blocks. These blocks conform to the industry’s #89D standard.
No. 72-6689
“66” Block Standoff Mounting Bracket
Designation Strips
These designation strips mount easily and quickly to any “66”
Block and provide a place to mark the usage of the pair(s)
involved. They are constructed of durable plastic with painted
lines between the rows. They are usually purchased in pairs.
No. 72-6610
White lined designation strip.
No. 72-2231B
Wire Spool without screw
Dimensions:
3” High X 1.5” Diameter
Wire Distribution Spools
These mushroom shaped plastic spools are used to facilitate
the routing of wire and cable. They are used on cross connec-
tions, fanning cable. By using the proper screw they can be
mounted to almost any surface including 19” Racks. They are
constructed with high impact plastic. They are compatible with
EIA/ TIA Industry Telecommunication #20A standards.
“66” Block Bridging Clips
The clips press onto the center slots of the “66” Block and allow
the left pair and the right pair to be connected together. Example;
If you terminate the incoming station cable pairs on the left and the
equipment wiring on the right hand pair, then by use of the bridging
clip they are connected.
No. 72-6602
Bridging Clips (100 pk)
Dimensions:
10” H X 3.40” W X 1.50” D
No. 72-6650
50 Pair “66” Block
Features
50 Rows of two pairs of connectors
Allows quick and easy installation
Uses “66” Style Punch-down Tool
Dimensions: 10” H X 3.31” W X 1.18” D
No.
72-4100B
Retrofit Bracket
No.
72-4102B
New Construction Low Voltage Bracket
BULK PACKED ONLY
BULK PACKED ONLY
BULK PACKED ONLY
Uses # 10 wood screw.
TELEPHONE STATION WIRE
Heavy Duty 22 AWG Round Wire used for inside installation. Solid Conductors
4 Conductor
No. TC51
- 50 ft. - Beige
No. TC51WH
- 50 ft. - White
No. TC101
- 100 ft. - Beige
No. TC101WH
- 100 ft. - White
No. TC501
- 500 ft. Easy Pullout Box - Beige
10
OFC...,NP10,1,2,3,4,5,6,7,8,9 11,12,13,14,15,16,17,18,19,20,...352