PANEL LAMPS & INDICATOR LIGHTS
The “M” series splash proof indicator light mounts securely to the panel (3/8” Mtg. Hole) with an O-Ring, lock washer and hex nut
to provide a weather proof seal. The “M” series is available in 14V and 125V AC rating and illumination is produced with incandes-
cent lamp (14V) or neon lamp (125V). Termination is 6” leads.
The “M” series is supplied with a popular small dome lens in Red, Green, Amber, Blue and White. Stainless steel bezels are spec-
ified for an attractive look and durability against the front panel. Splash Proof, ideal for harsh environments and suitable for indoor
or outdoor use.
Dome Indicator Lights (M-Series)
12-14V Incandescent Lens Color 125V Neon
11-2830
Red 11-2840
11-2832
Amber 11-2842
11-2834
White 11-2844
11-2838
Green 11-2848
11-2839
Blue 11-2849
Technical Data:
* Fits into 0.375” panel hole.
* Incandescent and Neon illumination.
* Splash proof design
* Supplied with hex nut, lockwasher and O-Ring.
* Small dome lens
* Body Material: Nylon
* Lens Material: Polycarbonate
* Bezel Material: Stainless Steel
* Wire Gauge: 20ga
* Wire Strip 1/2”
c
US
NEMA 3R
* Mounting Hole Dimensions shown are TYPICAL.
Customer is responsible for determining
final size based on panel material and thickness.
.62
1.50
3/8-32 Thread
Mounting Hole
Panel Thickness
Range: .03 - .25
6”
1/2”
0.36
.26
Splash Proof Indicator Lamp (M-Series)
for Indoor or Outdoor Harsh Environments
.375” Hole Size - 6” leads
NEMA 3R
1” ROUND SEALED LED’s PANEL LAMPS (K - Series)
Materials:
Housing:
PBT w/20% Glass
Lens:
Polycarbonate
Diffuser:
POM (polyacetal)
Hex nut:
Polycarbonate
Applications:
*
Restaurant kitchen equipment
*
Emergency vehicles
*
Industrial machinery
*
Marine panels
*
Medical equipment
*
Lab equipment
Electrical:
Dielectric withstanding voltage:
630V - terminal to housing
Insulation resistance:
380V AC - terminal to housing
Surge protection:
2000V @ 50 micro seconds
The K series is a screw based indicator that is mounted in a 22mm (7/8”) cut out and is fastened to the panel with a plastic nut and sealed with
an “O” ring gasket for a tight panel seal. Nut & “O” ring are included.
Illumination is achieved by means of surface mount LED’s on a sealed PCB board which provides bright and even lighting. The K series LED indi-
cator is available in 5 colors with two transparent lens style: flat with diffuser and tapered with diffuser. The K series is available in 12V DC and
28V DC, screw clamp type terminal designed for quick termination for both solid and stranded wires.
Screw Clamp Type
Terminal
Part no. Voltage Lens Color Lens Type
11-2630
12-14 Volt
RED Flat Top with Diffuser
11-2632
12-14 Volt
YELLOW Flat Top with Diffuser
11-2634
12-14 Volt
WHITE Flat Top with Diffuser
11-2638
12-14 Volt
GREEN Flat Top with Diffuser
11-2639
12-14 Volt
BLUE Flat Top with Diffuser
11-2640
12-14 Volt
RED Tapered with Diffuser
11-2642
12-14 Volt
YELLOW Tapered with Diffuser
11-2644
12-14 Volt
WHITE Tapered with Diffuser
11-2648
12-14 Volt
GREEN Tapered with Diffuser
11-2649
12-14 Volt
BLUE Tapered with Diffuser
11-2650
28 Volt
RED Flat Top with Diffuser
11-2652
28 Volt
YELLOW Flat Top with Diffuser
11-2654
28 Volt
WHITE Flat Top with Diffuser
11-2658
28 Volt
GREEN Flat Top with Diffuser
11-2659
28 Volt
BLUE Flat Top with Diffuser
Transparent tapered
lens with Diffuser
Transparent flat
lens with Diffuser
Mounting Hole
Typical Applications:
* Transportation
* Industrial Machinery
* Emergency Vehicles
* Food Equipment
* Marine Panels
* RV’s
281
OFC...,271,272,273,274,275,276,277,278,279,280 282,283,284,285,286,287,288,289,290,291,...352