284
PANEL LAMPS & LED’s
INCANDESCENT PANEL LAMPS
Grain of Wheat Lamps
These miniature lamps have many uses. They are
used as dial lights in many consumer products.
They are available in several voltages with 15 cm
wire leads attached.
12V High Flat-Top Indicator
These panel lamps have a 9 mm high X 12.5 mm
diameter lens, a 12V lamp, and wire leads. The
indicator will operate on AC or DC voltages and
snaps into a 12.7mm (1/2”) diameter hole.
12V High Dome Indicator
Panel lamps with a 13 mm high X 12.7 mm dome lens, a
12V incandescent lamp, and wire leads. They snap into
a 12.7mm (1/2”) diameter hole. Lamps work on either
AC or DC voltages.
12V Flat-Top Snap-in
Indicator
These panel lamps are 8.6 mm in diameter
with a 5 mm high flat lens, a 12V incandes-
cent lamp, and wire leads. They mount into
a 7.5mm (19/64”) hole and will work on either
AC or DC voltages.
Miniature Snap-In
Indicator
Miniature snap-in panel lamps with a
LED lamp and a built-in resistor for
12V DC operation. The device is
8.6 mm in diameter and snaps into a
7.6mm (19/64”) hole.
3 mm LED in Dome
Chrome Bezel
These panel lamps are made to operate
on 2V DC and need a resistor for any
other voltage. They have a chrome
Dome shaped Bezel which hold a 3 mm
LED. The lamp mounts into a 5.9mm
(15/64”) mounting hole with a hex nut.
5 mm LED in Dome
Chrome Bezel
These panel lamps are made to
operate on 2V DC and need a resistor
for any other voltage. They have a
chrome Dome shaped Bezel which
hold a 5 mm LED. The lamp mounts
into a 7.9mm (15/16”) mounting hole
with a hex nut.
No.
11-372
Red
No.
11-373
Orange
No.
11-375
Green
No.
11-362
Red
No.
11-363
Orange
No.
11-365
Green
No.
11-382
Red
No.
11-383
Orange
No.
11-385
Green
No.
11-222
Red
No.
11-223
Amber
No.
11-225
Green
No.
11-282
Red
No.
11-283
Orange
No.
11-285
Green
No.
11-202
Red
No.
11-203
Orange
No.
11-205
Green
No.
11-706
6V AC / DC - 40mA
No.
11-712
12V AC / DC - 50mA
No.
11-724
24V AC / DC - 50mA
LED PANEL LAMPS
3 mm LED Lamp
Holder
The holders hold a 3 mm LED
(T-1). They are a chrome
recessed style holder which
mounts in a 5.9mm (15/64”)
hole with a hex nut.
No.
11-450
SPRING CLIPS
Spring clips for lamp
assemblies. In situations
where panel hole size
and/or panel thickness
does not allow a tight fit, a spring clip
may be used to secure the assembly.
Spring clips are available for both the
.312” and .50” diameter lamp. In most
installations, they will not be needed. A
correctly sized hole will allow a secure
installation.
11-2075
5 -PAK SPRING CLIP
FOR .312” Indicator light
assemblies
11-2375
5 -PAK SPRING CLIP
FOR .50” Indicator light
assemblies
add “B” suffix to the part number for the bulk
stock purchase; min, 100 pieces.
Philmore
Part No.
Description
12V Flush Snap-In
Indicator
These snap-in panel lamps are constructed
to operate at 12V AC or DC with wire
leads. The lens is flush with the chrome
bezel. The mounting hole is 12.7mm (1/2”)
mm in diameter.
No.
11-212
Red
No.
11-213
Orange
No.
11-215
Green
OFC...,274,275,276,277,278,279,280,281,282,283 285,286,287,288,289,290,291,292,293,294,...352