294
PROTOBOARDS
Datak Protoboards, Available in fiberglass for R.F. and digital circuits. In addition to use at high frequencies, fiberglass provides better characteristics in higher temper-
ature environments, those with exposure to humidity. Choose from phenolic for economy or the new fiberglass substrate.
Datak Protoboards have copper one side, and are printed on the (opposite) component side to aid in keeping track of where copper side traces are located. Holes
accept standard component leads, including IC’s, and are spaced on standard 0.10” centers. Board material is standard 1/16” thickness for both materials. FR-4 mate-
rial dielectric constant is 4.7 at 1MHz and 4.25 at 1 GHz. typical.
Small General Purpose Protoboard.
Size 1.8” wide by 3.6” long. The board is two smaller, identical boards and
scored for easy break-apart when only a very small board is needed. This is a simple board with a matrix of (single)
holes on 1/10” centers, copper one side.
Small general purpose board in Phenolic.......Datak no. 12-602
Small general purpose board in Fiberglass......Datak no. 12-603
Small IC Protoboard.
Size 1.8” wide by 3.6” long. The board accommodates standard DIP (dual inline) IC’s. Two smaller,
identical boards and scored for easy break-apart when only a very small board is needed. Hole spacing on 1/10” centers,
copper one side.
IC Protoboard in Phenolic.......Datak no. 12-607
IC Protoboard in Fiberglass......Datak no. 12-608
Small Protoboard.
Size 1.7” wide by 2.9” long. Features drilled copper pads connected via traces in groups of two and
three. A general purpose small board that can accommodate transistors and common passive components well.
Protoboard in Phenolic.......Datak no. 12-611
Protoboard in Fiberglass......Datak no. 12-612
Medium size Protoboard.
Size 5.16” x 1.90” and large enough to accommodate circuits containing several IC’s.
Forty-five rows of holes are set up so that IC’s can straddle the center of the board and each IC pin has five pads
for the connection of the IC pin to other components.
Medium Size Protoboard in Phenolic...................Datak no.12-617
Medium Size Protoboard in Fiberglass.................Datak no. 12-622
Large Protoboard 4.30” x 5.50” a board with over 1900 pad/holes and large enough to accommodate some
large circuits. The component side pads are imprinted with ink so that the user will know where the copper is
on the solder side. Holes are sized to accommodate standard, leaded components on 1/10” centers; bright
copper accepts solder readily.
Large Protoboard in Phenolic.............Datak no. 12-600
Large Protoboard in Fiberglass..........Datak no. 12-601
FR - 4 FIBERGLASS AND PHENOLIC PROTOBOARDS
Strip PROTOBOARDS
Copper strips on one side, 0.40” diameter holes are on 0.10” centers to accept common component leads. The
strips run full length but user may break them up using an Exacto knife. These are handy for prototyping and may
be cut with sheet metal sheer, hack saw etc. to make smaller boards. The board is xxp phenolic material .
No. 12-618...size 3 15/16” wide X 6 5/16” length
No. 12-619...size 3 15/16” wide X 9 13/16” length
OFC...,284,285,286,287,288,289,290,291,292,293 295,296,297,298,299,300,301,302,303,304,...352