295
Training employees to remove/replace Surface Mount
Components is expensive if you have to draw from good invento-
ry. The Datak No. 12-900 practice board provides a range of com-
ponent pads intended to be used by new employees until they are
competent with your desoldering/soldering equipment.
Components themselves are not supplied and it is suggested that
you use defectives from your inventory or the lowest cost compo-
nents available from surplus dealers or distributors.
Both sides of the PC board are identical and each side contains
the following component footprints: One each PLCC 68 pin and
44 pin, one each 68 pin PQFP Bumper pack, eight SOT-23, two
PLCC 28, four PLCC20, one PLCC24, three PLCC18, two
SOIC20, two SOIC14 and an assortment of SOT-143, 3216, SOT-
89 and 0805 patterns. Employees can learn the job well even if
your exact patterns are not on this training board.
No. 12-900
- Double Sided SMD Soldering Training Board
PROTO TYPE & PRINTED CIRCUIT BOARDS
PREMIER PRINTED CIRCUIT BOARDS
POSITIVE ACTING, PRESENSITIZED
PC BOARDS USING FR - 4 FIBERGLASS
SUBSTRATE
These new sizes are in demand in many specialized applications.
The thin 1/32” boards are light weight and fit edge connectors
designed for that board thickness. And the 2oz. boards have
exactly twice the standard thickness of copper; a requirement in
applications where higher current will be used or when higher
conductivity is imperative.
Peel-off
protective
plastic cover
Like the standard series of 1/16” thickness, 1oz. Premier
Printed Circuit boards, the new numbers may be exposed with
any ordinary 100 watt lightbulb. Use with either Datak positive
acting developer Nos. 12-402 or 12-404.
Board Size
(Inches
Copper
Wt.
Copper
Sides
Thickness
Premier
Number
2 x 4
1 oz.
1
1/16”
14-024
3 x 4
1 oz.
1
1/16”
14-034
3 x 4
1 oz.
2
1/16”
14-234
3 x 6
1 oz.
1
1/16”
14-036
4 x 6
1 oz.
1
1/16”
14-046
4 x 6
1 oz.
1
1/32”
14-446
4 x 6
1 oz.
2
1/32”
14-546
6 x6
1 oz.
1
1/16”
14-066
6 x 6
1 oz.
2
1/16”
14-266
6 x 9
1 oz.
1
1/16”
14-069
6 x 9
1 oz.
2
1/16”
14-269
6 x 9
1 oz.
1
1/32”
14-469
6 x 9
1 oz.
2
1/32”
14-569
6 x 12
2 oz.
1
1/16”
14-662
6 x 12
2 oz.
2
1/16”
14-762
7 x 10
1 oz.
1
1/16”
14-071
12 x 12
1 oz.
1
1/16”
14-112
12 x 12
1 oz.
2
1/16”
14-312
Copper One Side:
(1/16” Thickness)
Size
Size
No.PCB24
2” x 4” No. PCB69
6” x 9”
No.PCB35
3” x 5” No. PCB810
8” x 10”
No.PCB46
4” x 6” No.PCB1212 12” x 12”
No. ER11
PC two board set, one 5” x 6” and one 3” x 4.5”
Copper Both Sides:
(1/16” Thickness)
Size
No.PCB266
6” x 6”
No.PCB2810
8” x 10”
COPPER CLAD BOARDS
Standard copper clad boards are made of an FR4 substrate with 1 oz.
(.0014”) copper surface.
Copper One Side:
(1/32” Thickness)
Size
No.PCB71
6” x 9”
Copper Both Side:
(1/32” Thickness)
Size
No.PCB79
6” x 9”
NOTE: For complete printed circuit board accessories see pages 268 - 275.
THIN COPPER CLAD BOARDS
SMD SOLDERING PRACTICE BOARD
for training rework personnel
OFC...,285,286,287,288,289,290,291,292,293,294 296,297,298,299,300,301,302,303,304,305,...352