PROTECTIVE COATINGS & PCB ACCESSORIES
All dry transfers have limited resistance to abrasion and handling; they should be given a protective coating. A great deal of development has gone into creating
Datak’s protective coatings, which we believe to be the best that you can use on any brand of transfers.
DATAKOAT
TM
for Hard Surfaces
Protects dry transfers with a tough, clear, weatherproof shield. Water clear and will not yellow
with age.
RESISTANCE: unaffected by methanol, ethanol, isopropanol, hexane, naptha and mineral spir-
its. Unaffected by most lubricating oils and hydraulic fluids. But soluble in; Freon, methylene
chloride, butanol, higher alcohols, acetone, ketones, toluene, xylene and glycol ethers.
Supplied in a brush-on package for local application to dry transfers. The dried brush-on leaves
a shiny coating;
DATAKOAT brush-on liquid w/thinner (1 oz.) - No. 04176
HARDKOAT
TM
for Paper or Cardboard...
Clear sprays protect dry transfers on absorbent surfaces such as paper. Abrasion resistance is superior
to DATAKOAT, but resistance to weathering and UV is not as good.
One coat over paper will completely protect a dry transfer from scuffing and abrasion. Matte coats give a
pleasing frosted effect. Heavy multiple spray coats may have a perceptible yellowish tint, so use
DATAKOAT where an absolutely water-clear coat is essential. HARDKOAT films dry tack-free within a
few minutes, but require several days to fully harden.
When coating a large area, the gloss spray can produce a pleasing, somewhat shiny appearance. If
using on local area, the matte finish tends to be less visible.
HARDKOAT gloss spray (12 oz.) - No. 04170
HARDKOAT matte spray (12 oz.) -No. 04171
PC BOARD MAKING CHEMICALS, ACCESSORIES
COPY CLEAR SHEETS
For use in laser print-
ers and most dry
toner copy machines
to make film positives.
Great for copying cir-
cuits from magazine
or printing out circuits
designed on PC
DATAK
Pkg. of 5 sheets
(8-1/2” x 11”)
No.12-500
1/10” GRID SHEETS
1/10” Grid Sheets
printed in non-
repro blue.
Perfect for circuit
layout when used
under DATAK
clear lay-out film
(No. MS-21)
Pkg. of 3 sheets
(8-1/2” x 11”)
No.12-505
NITRILE DISPOSABLE GLOVE
PLASTIC STORAGE BOTTLES
DATAK offers 2 sizes
(8 oz. and 16 oz.) plas-
tic bottles for safe stor-
age of your chemicals.
-1 Pair
No.12-510
LAB PC BOARD ETCHING TANK SYSTEM
This handy etching tank system will handle
P.C. boards up to 8” x 9” and 2 at a time.
The tank holds 1.35 gallons of etching solu-
tion. The system is supplied with air pump
for etchant agitation, heater for keeping
etchant at optimum temperature and con-
venient board holder. Tank has tight fitting
top to prevent evaporation when not in use.
No. 12-700
Pkg. of 2 Bottles
No.12-506
- 8 oz.
No.12-516
- 16 oz.
These gloves are per-
fect for use when work-
ing with chemicals
involved with making
P.C. boards. Good for
use with photo chemi-
cals (negative or posi-
tive) and ferric chloride
etching solution.
UN No. 1294
298
OFC...,288,289,290,291,292,293,294,295,296,297 299,300,301,302,303,304,305,306,307,308,...352