76
HOME THEATRE
AUDIO CONNECTORS & ADAPTORS
DESIGNER PLATE STYLE
STEREO VOLUME CONTROL
LKG in-wall volume attenuator will benefit surround sound,
home theater and multi-room installations. No matter how
complex the system is. All controls work with 4 or 8 ohm
speakers. Frequency response for all units is 35Hz-20 KHz at
rated power. Fits standard electrical box.
No. 75-1055 -
White
10 Watts RMS
30 Watt average
55 Watts Peak
No. 75-1150 -
White
25 Watts RMS
75 Watt average
150 Watts Peak
• Number of steps, 12.10 steps of
attenuation at 3dB each, and at 6dB for
the last two steps. Total attenuation at
30dB and off.
• ABS plastic knob
• Accepts up to 12 AWG wire.
HIGH POWER SPEAKER TERMINALS
Recessed Banana
Plug/Binding Posts
Dual banana jack style, will accept dual
banana plug, up to 10 or 12 gauge wire
or tip jacks. Intended for high audio
power: 150 watts and above. One red
and one black post, angled upward for
easy access.
No. 1996
Dual Banana Plug/Binding
Posts
Dual banana jack style, will accept
dual banana plug, up to 10 or 12
gauge wire or tip jacks. Intended for
high audio power: 100 watts and
above. Popular round style is easy to
mount. One red and one black post,
angled upward for easy access.
TERMINAL STRIPS
With push - in connection
No. 1978 -
2 Position
No. 1979 -
4 Position
No. 1997
4 Position
No. 1979
2 Position
No. 1978
PUSH TYPE SPEAKER TERMINALS
Color coded four pairs, (8 position)
alternating red and black, for quick
connection of speakers using bare
wire up to and including 16 gauge
PCB Mount.
No. 1990
Optical Coupler
Use these connectors to extend your optical
cables. They are designed to couple two (2)
Toslink cables together. They are designed with
two (2) Toslink jacks, one on each end of the
barrel shaped connector so the optical signals
are not refracted.
No. 45-1250
Optical Fiber Splitter
This item is designed to either couple or split an optical
signal. Use this device to combine two accessories
such as DVD, DAT, or Digital headphone into a piece of
equipment with only one input. You may also use the
device to split your digital signal and direct it to two sim-
ilar devices. There are two (2) POF (plastic optical fiber)
receptacles on one (1) end and one receptacle on the
other end.
Dimensions: 2 1/4” L x 1 1/2” W x 3/4” D.
No. 45-1258
Coax to Toslink Converter
These devices are used to convert coaxial cable to POF (plastic optical fiber)
for use with DVD’s, DAT’s, Digital Headphones, and other Digital equipment.
This device has an active IC circuit which takes the coaxial signal and converts
it to a digital signal. There is a Toslink receptacle on one end and an RCA jack
on the other end. The unit uses a 6V DC @ 250 mA power supply. (INCLUD-
ED)
Dimensions: 2 3/4” W x 1 3/4” L x 7/8” D
Toslink to 3.5mm Adaptors
Use these adaptors to convert between mini phone plugs and optical
fiber (Toslink) connectors. These devices are to be used with equip-
ment that use 3.5mm mini phone jacks as the optical connection. If
the mini phone jack is not an optical input, you will have to use LKG
45-1251 to convert the signal.
No. 45-1252
Toslink Plug/3.5mm
Mini Jack
No. 45-1253
3.5mm Mini Plug/Toslink
Jack
Right Angle Optical
Connector, Toslink. Male
to Female.
Gold Plated Contacts.
No. 45-1259
No. 45-1251
CONVERTS COAXIAL TO OPTICAL SIGNAL
No. 45-1245
CONVERTS OPTICAL TO COAXIAL SIGNAL
OFC...,66,67,68,69,70,71,72,73,74,75 77,78,79,80,81,82,83,84,85,86,...352