Dead
Front
GroundingCap
A UL and CSA listed 3-prong AC plug, accommodates wires up to 12awg. Steel
amour housing. Very tough plug. Yellow.
Philmore no.
8515P
Armored
GROUNDING CONNECTOR UL, CSA listed (yellow) 3-contact grounding female cord
mounting connector. Armored and heavy duty; accommodates up to 12 gauge
wire.
Philmore no. 8515J
Rubber
AC 3 wire CONNECTOR
(MALE PLUG)
Rubber plug
resists petroleum products, remain flexible during cold and resistant to
heat. Accommodates cords from .225" to .600 in diameter.
Philmore no. 8520
Rubber AC 3-wire Connector (female receptacle). Rubber resists temperature, remains flexible
cold. Accommodates cords up .225" to .660" in diameter.
Philmore no. 8525
AC
Rubber Attachment PLUG
Rated 15 amps (at) 125 volts AC, brass plated steel spring prongs. Use for
heavy duty or regular use.
Philmore no. 6092S
Female
OFFICE EQUIPMENT AC CONNECTOR.
Three prong connector mates with the male prongs on most
computers, copy machines etc. Rated 10Amps (at) 250 V AC (generally used on
110V AC equipment).
Philmore no. 8522
General
Duty AC PLUG. Armored vinyl connector for use on extension
cords. NEMA rated (at) 15 amps at 125 volts AC. UL and
CSA listed. Strain relieve will secure cords from .250" to .685" diameter. A
durable, dependable connector.
Philmore no. 8567
General
Duty AC Female in-line AC Connector Armored vinyl femaile connector, generally used on
extension cords for replacement. NEMA rated (at) 15 amps at 125 volts AC. UL
and CSA listed. Strain relief will handle cords from .250" to .685". Durable
connector and female counter part for no. 8567.
Philmore no. 8587
Male
OFFICE EQUIPMENT AC
CONNECTOR. Three prong male connector mates with no. 8522
above, cords made for office equipment etc. Rated (at)10A (at)250V AC.
Philmore no. 8523
Hospital
Grade AC male Connector AC Power connector meets all Federal Specs and National
Electric code for hospital use. For wire from .250" to .685" diameter. NEMA
5-15 and rated at 15 amps (at)125 Volts AC.
Philmore
no. 8266
Hospital Grade AC female Connector AC Power connector meets all Federal Specs and National
Electric code for hospital use. For wire from .250" to .685" diameter. NEMA
5-15 and rated at 15 amps (at)125 Volts AC.
Philmore no. 8269
Panel
Mounting MALE snap-in Panel mounting OFFICE EQUIPMENT type AC
CONNECTOR Rated 15A (at)250 Volts AC
Philmore no. 8527
AC
POWER
RECEPTACLE.
A UL listed female connector typically mounted in a panel to add a
convenience receptacle to radios, clocks etc. Rated for 110 volt, five amp
usage. Mounts in panel hole 1-1/16" X 7/16".
Philmore no. R118J
Philmore
also has AC cords with molded plugs as well as extension cords and bare
SPT-1 power cord. See the Power Cord page
to see the listing.
Panel
Mounting male OFFICE EQUIPMENT style AC CONNECTOR
Rated 15A (at)250V AC, mounts with screws in mounting ears.
Philmore no. 8529
JIFFY
PLUG AC Plug that requires no tools
or stripping; simply insert the wire and assemble. The Jiffy Plug pierces
the wire for a good electrical connection. For SPT-1 Zip cord.
Philmore no. 8901 color white
Vinyl CUBE TAP For 117 volt AC outlets, rated 15
amps.. Adds to the number of outlets; one socket becomes three, two-
conductor sockets.
Philmore no. 8400
Parallel
GROUNDING ADAPTOR Use three-prong plugs in two prong sockets; grounding
lead may be secured under wall plate mounting screw. UL Listed.
Philmore no. 8419
Triple GROUNDING TAP Converts a single, three-prong outlet into Three,
three-prong (grounded) outlets. Bakelite case.
Part nos.
8147V Ivory color. 8147B Brown color
Bakelite FLAT GRIP PLUG (CAP)
UL Listed two conductor plug (non-polarized) rated 15amps at 125 volts AC.
Philmore part no. 1051B brown color
Philmore part no. 1051V
Ivory color
Replacement
AC Power plugs. top Photo is no.8464
(click for photo larger view)
All are cord mounting , solder terminals. Used frequently on portable
equipment such as recorders, radios. Second from top is no. 8465, and
bottom photo is no. 8466