Philmore Manufacturing Company, Inc. div. of LKG Industries of Rockford, Illinois USA
Copyright © 2003 all rights reserved

  DC to AC POWER INVERTORS
    Household power from the car Battery.
(Click on photos for larger view)

    Handy 110-117 Volt AC power supplies that provide you with "house current" AC power in your automobile. The 150 watt unit may be simply plugged into your cigarette lighter socket and the 300 watt unit should be connected at the battery with the included battery clamps (the cigarette lighter socket may not be able to handle the current).

    USES include notebook computers, small TV’s and radios and just about any other AC appliance as long as you do not exceed the rating in "watts". Be careful with lager inductive loads, such as refrigerators or similar devices as they "Kick-in" with a terrific current draw when the compressor motor starts and that may overwhelm an invertor with the high current drain.

    Both of these units are protected from damage by overload and over temperature circuits that will shut them down until the problem is removed. The output voltage is 60 hertz +/-1% modified sine wave and efficiency is nearly 90%. These are new designs, very efficient and state-of-the-art. Other features are:
Power Input: 10 to 15 Volts DC
Power Output: 95 to 120 V AC
No Load current drain: 250 mA
Indicator LED (red) during operation.

DC to DC 2 AMP CONVERTER Model no. 48-150
for use in automobile
(click on photo for larger view)

A REGULATED supply! Plugs into your cigarette lighter socket to supply you with your selection from these voltages: 3, 4.5, 6, 7.5, 9 or 12 volts DC. With polarity reversal feature and adaptor plug set included, you can power most small appliance such as games, radios, TV’s, notebook power supplies, CD players, scanners and so forth; virtually anything that draws under two amps. Well regulated, holds close to voltage selected to protect you equipment.
    Includes an LED (red) pilot light, power plug set and a fused lighter plug. The unit is short circuit and overload protected which will allow it to shut down instead of burn out.

DC to DC 1 AMPERE CONVERTER Model no. BE19
for use in automobile
(click on photo for larger view)

Maintains voltage within one volt regardless of variations in your appliances current draw. Run just about any small electronic device. The output current varies with the value of the voltage selected as shown here.

        Set of adaptor plugs included and polarity reversing feature assure the BE19 will connect to just about any small electrical, battery-operated device.

Automotive DC CONVERTER Model no. BE164
(click on photo for larger view)
   
Up to 800 mA at these voltages: 1.5, 3, 4.5, 6, 7.5, 9 and 12 volts DC. User may set any one of these voltages via an easy switch on the case. Unit plugs into cigarette lighter socket in car; and includes a "multi-plug" adaptor that will fit many small radios, CD players etc.

2 in 1, 800 MA REGULATED DC/DC CONVERTER   Model no. 48-160    (click on photo for larger view)
Includes and extra cigarette lighter socket on the case of the converter, which makes up for the times when the unit has to block the car’s cigarette lighter socket when in use; a handy feature. This is a well regulated circuit supplying these voltages: 1.5, 3, 4.5, 6, 7.5, 9 or 12 Volts DC. The unit is short circuit and overload protected, and has an LED (red) pilot light to indicated "on". A set of coaxial plug adaptors should fit most small radios, CD players, calculators etc. etc.

    Philmore Manufacturing Company, Inc. div. of LKG Industries of Rockford, Illinois USA
Copyright © 2003 all rights reserved