263
MULTITESTERS / CIRCUIT TESTERS
HI-VOLTAGE TESTING SCREWDRIVER
No. 903-150N
SPECIFICATIONS:
2000 OHMS–VOM
6 to 12 VOLT CIRCUIT TESTER
with HEAVY DUTY PROBE
DIGITAL MULTI-TESTER
TEST LIGHT
No. P5120
For testing 80-250 Volts AC or DC. This handy combination screwdriver/tester
is used for testing ground lines, open or shorted circuits.
No. P5128
For testing all 6V and 12V systems: Auto, RV, Marine, Aircraft etc..
Quickly finds short, grounds and open circuit.
No. P5100
For testing 80-500 Volts AC or DC. The 5” insulated leads with finger guard
insulated tips make testing electrical circuits safe and easy. Red neon bulb
glows with increasing intensity with increased voltage.
DISPLAY
OVERRANGE INDICATION
MAXIMUM COMMON MODE
VOLTAGE
OPERATING ENVIRONMENT
STORAGE ENVIRONMENT
TEMPERATURE COEFFICIENT
POWER
BATTERY LIFE
DIMENSIONS
3 1/2 digit LCD .5” height, with polarity.
3 least significant digits blanked
500V peak.
0 to 50 C, less than 80% relative humidity up to 35º C,
less than 70% relative humidity from 35º C to 50º C.
-15º C to 50º C
(0 to 18 C, 28 to 50), less than 0.1x applicable
accuracy specification per C.
9V alkaline or carbon-zinc battery (NEDA 1604)
100 hours typical with carbon-zinc cells,
200 hours with alkaline cells.
126mm long x 70mm wide x 24mm thick.
(4.96”x2.76”x0.94”) Net weight 170g (6 oz)
Specifications:
Slip Grip Test Leads, Battery and Instructions are included
Sensitivity:
DC Volt Ranges:
DC Current Ranges:
AC Volt Ranges:
Resistances Ranges:
Accuracy:
2000 ohms/volt
2.5-10-50-500-100
0.5-10-250ma.
10-50-500-1000
5K-50K-500K
3%DC, 4%AC
HIGHER PERFORMANCE
POCKET MULTITESTER
No. UM22
Plastic test prod handles, 4” long, 3/8” diameter, with prods 1” long. Red
and Black. Equipped with 48” kinkless plastic-covered leads .135” O.D.
Available with either insulated banana plugs or phone tips at other end,
to fit standard American jacks.
TEST LEADS
No. 466
Phone Tips
No. 467
Banana Plugs
Two 42” flexible, vinyl-covered test leads, heavily insulated to
prevent high voltage breakdown and cut-through. 80 -strand
copper conductors eliminate wire fatigue and assure long life.
Equipped with adaptor accessories most often used by ser-
vicemen, this kit can perform virtually every test requirement.
Each lead is attached to a 4-3/4” probe (1-red, 1-black).
Banana plugs on each end have nickel-plated phosphor
bronze springs to maintain rigid contact through many thou-
sands of insertions.
Heavy plated BRASS Adaptors-Color-
coded Spade Lugs*
-large enough for lab. instruments (up to
1/4” dia. center post).
Test prod phone tips
(0.180” dia.)
Strong spring action alligator clips. NP phone tips.
-not
insulated. Each insulated adaptor completely covers banana
plugs to eliminate accidental contact, avoiding shorts.
DELUXE UNIVERSAL SOLDERLESS TEST
LEAD SET
No. SA15