285
Miniature Screw Base Lamp Holder
These lamp holders can house a standard miniature screw based lamp. They
have a dome lens and mount into a 15.7mm (5/8”) mounting hole.
Midget Screw Base Lamp Holder-Flat
Lens
Lamp holders for midget screw based lamps. They have a 9 mm high flat lens
and mount into a 9.9mm (25/64”) hole.
No.
11-512
Red
No.
11-513
Orange
No.
11-515
Green
Midget Screw Base Lamp Holder-Dome
Lens
Lamp holders for midget screw based lamps. They have a 9 mm high dome
lens and mount into a 9.9mm (25/64”) hole.
No.
11-552
Red
No.
11-553
Orange
No.
11-555
Green
No.
11-522
Red
No.
11-523
Orange
No.
11-525
Green
PANEL LAMPS & LED’s
3 mm LED in Recessed Chrome
Bezel
These panel lamps are made to operate on 2V DC and
need a resistor for any other voltage. They have a
chrome recessed shaped Bezel which holds a 3 mm
LED. The lamp mounts into a 5.9mm (15/64”) mounting
hole with a hex nut.
3 mm LED in Recessed
Chrome Bezel
These panel lamps are made to operate on 12V
DC and has a built-in resistor. They have a chrome
recessed Shaped Bezel which hold a 3 mm LED.
The lamp mounts into a 5.9mm (15/64”) mounting
hole with a hex nut.
No.
11-312
Red
No.
11-314
Yellow
No.
11-315
Green
5 mm LED in Dome
Chrome Bezel
These panel lamps are made to operate on 2V
DC and need a resistor for any other voltage.
They have a chrome Dome Shaped Bezel
which hold a 5 mm LED. The lamp mounts
into a 7.9mm (5/16”) mounting hole with a hex
nut.
No.
11-306
Red
No.
11-307
Orange
No.
11-308
Green
No.
11-302
Red
No.
11-303
Orange
No.
11-304
Yellow
No.
11-305
Green
Large Rectangular Indicator
These panel lamps have a large rectangular 15.5 mm X
19.5 mm lens, a 120V AC Neon lamp ( with resistor) and
solder terminals. They mount into a 15.8mm (5/8”) hole
with a mounting nut.
Flat-Top Snap-In Indicator
These panel lamps have a built-in resistor and are
made to operate on 120V AC. The lens is
12.5 mm in diameter with a chrome bezel. The
mounting hole is 12.7mm (1/2”) and they have
wire leads.
High Dome Indicator
Panel Lamps with a 13 mm high dome
shaped lens, wire leads, and a built-in resistor
for operation at 120VAC. The mounting hole
is 12.7mm (1/2”) in diameter.
Miniature Bayonet
Lamp Holder
These lamp holders can house a standard miniature bayonet based lamp. They
have a jeweled lens and mount into a 15.7mm (5/8”) hole.
No.
11-542
Red
No.
11-543
Orange
No.
11-545
Green
No.
11-122
Red
No.
11-123
Orange
No.
11-125
Green
No.
11-142
Red
No.
11-144
Amber
No.
11-145
Green
No.
11-102
Red
No.
11-103
Orange
No.
11-105
Green
LED PANEL LAMPS