301
PROJECT CASES & RUBBER FEET
Deluxe Molded Project Box
This fine project box provides user with
professional finished product. The unit
features threaded brass inserts in top &
bottom for security circuit board assem-
blies. The case is secured together with 4
screws and threaded brass inserts for non
stripping reuse. The front and back panes
are removable for easy machining and
drilling. Case top and bottom are light
grey. The front and back are dark grey.
Part No.
L
W
H
PB275 7-
1/2
” x 4.0” x 2-
7/8
Removable front & back Dimensions
2-
3/8
” x 3-
5/8
Test Equipment & Instrument Cases
These deluxe instrument cases feature
separate front and back panels, inter-
nal slots to hold PC boards in place
and internal mounting posts for secur-
ing PC boards. Case has metal studs
for non stripping of screws holding the
case together. Front & back panels are
plastic and are easily machined and
drilled. PB250 has grey case top and
front & panels are black. PB200 is all
black.
Part No.
L
W
H
PB200 8.0” x 6-
1/4
” x 2-
1/2
PB250 10-
1/8
” x 7-
3/8
” x 3-
3/8
RUBBER BUMPERS & PLASTIC FEET
For use on chassis boxes and equipment cabinets
Rubber feet/bumpers are self-adhesive and supplied
on a backing sheet. Application simply requires peeling indi-
vidual foot from the backing and sticking it to your cabinet or
chassis box. Soft rubber but will not leave marks on hard
surfaces.
Soft but firm, these three items make good bumpers, feet for
chassis boxes and spacers for PC boards. All are black in
color and about 70 durometer hardness.
Tapered Square
RUBBER FOOT or BUMPER
Self adhesive and will stick well to a chassis
box. Semi-soft rubber will not easily leave
marks.
Width at base: 0.50” Height: .237”
No. 10-610
12 pack
Dome Shaped
RUBBER FOOT or BUMPER
Dome shaped, self adhesive foot. Peel off of
backing and apply to any clean, smooth sur-
face. Semi-soft rubber does not normally leave
marks.
Diameter at base: .630” Height: .317”
No. 10-605
12 pack
Tapered Cylinder
RUBBER FOOT or BUMPER
Shaped like a tapered cylinder, self adhesive
and will stick well to a chassis box. May be
used with a no. 8 wood screw or machine
screw, if necessary. Semi-soft rubber will not
easily leave marks.
Diameter at base: .870” Height: .40”
No. 10-602
12 pack
Plastic Cabinet Feet
Molded of durable, high-impact plastic. Generally used in sets of
four on the bottoms of chassis boxes, equipment cases and
cabinets. All are packaged four per display package and are
also available in bulk.
“Low Profile”
PLASTIC FOOT
Semi-hard, molded plastic foot with just
enough softness to improve durability and
that softens the sound and shock a bit. Mount
with a No.6 machine screw and nut or with
wood screw. (not included)
Diameter: .986” Height: .235”
No. 10-650
4 pack
“Tall” PLASTIC FOOT.
A standard style foot, tapered. Made of hard,
high-impact plastic.
Mount with no. 8 screw (not supplied).
Color black.
No. 10-647
4 pack
Collet Mounting
Plastic Foot
A clever design, the foot can be mounted on a
cabinet from the outside. Drill a 5/16” hole
and place the foot into the hole. Then press a
plastic pin (supplied) through the center of the
foot; the pin spreads the integral collets and
the foot is attached .
Diameter: .775” Height: .388”
No. 10-644
4 pack