25 Watt, 125 VAC Photo-Switch
A small switch inside a plastic case with two lead wires. Normal
usage might be with incandescent, Halogen or LED lamps not to
exceed the 25 watt, 125 VAC rating. This switch is intended for indoor
use only.
PHOTO-ELECTRIC ON-AT-DARK SWITCHES
A series of handy switches that will switch on night lights for safety and security. Simple two-wire packages make this an easy series to use; each
has six inches long insulated wires with stripped ends. These switches are made to be mounted in a case or behind a control panel with the
photo-sensor protruding through a mounting hole.
100 Watt INDOOR/OUTDOOR Photo-Switch
A handy switch rated for 100 watts maximum (@125 volts AC) when
used to control an incandescent light or 39 voltamps if used with a flu-
orescent lighting assembly. The case assembly is best used inside a
protected case but the 8mm diameter sensor can protrude through
the mounting hole to either an indoor or outdoor environment. Built in
a protective plastic shell with three lead wires.
250 Watt INDOOR/OUTDOOR Photo-Switch
Used when a large lighting load is required(generally for large areas)
such as in dark warehouse areas, protected loading docks and can
handle an incandescent or Halogen lamp up to 250 watts (@125 volts
AC) or could be used with fluorescent lamp assembly up to 60 watts.
Built in a protective plastic shell with three lead wires. It can be used
for both indoor or outdoor environment.
Current Rating:
1.2 A @ 125V AC
Material:
Plastic housing
Terminal Type:
Solder
Wire Gauge:
Up to 18 AWG, SPT-1 or SPT-2
SPECIFICATIONS:
Cord Mount Dimmer Switch
No. 30-10190
Current Rating:
2A-125VAC, 1A-250VAC 1A-125VL
Material:
Plastic housing
Terminal Type:
Screw
Wire Gauge:
Up to 18 AWG, SPT-1 or SPT-2
SPECIFICATIONS:
Cord Mount Push Button Switch
No. 30-10198
Current Rating:
10A-125VA, 5A-250VAC 3A-125VL
Action:
LO-OFF-HIGH
Actuator:
Black Rocker with white Legend
Material:
Plastic housing
Terminal Type:
6” Wire Leads
SPECIFICATIONS:
HI-LO Rocker Switch
No. 30-9167
No. 30-10825
No. 30-10835
No. 30-10830
NEW PRODUCTS 2012
NP5
Mounting Hole: 0.80”