NP6
12V LIGHTED SNAP-IN ROUND ROCKER SWITCH
Current Rating:
20A-12VDC
Contact Resistance:
50m Ohm max
Insulation Resistance:
DC 500V 100M Ohm min.
Dielectric Strength:
AC 1500V for 1 minute
Body Material:
Nylon (UL 94V-2). Blue
Terminal Material:
Silver plated brass
Terminal Type:
12V Lead Wire Assembly
Part. No. Type Action
Actuator
30-12340 SPST ON – OFF
Blue LED
Illuminated body.
Red LED Rocker*
* Red LED illuminates when switch is in ON position
Mounting hole: 20.2mm (.79”)
IN-LINE PUSH BUTTON SWITCH
Current Rating:
3A-125V
Contact Resistance:
30 Ohm max
Insulation Resistance:
100m Ohm min.
Terminal Type:
Solder
No. 30-825
(Maximum cable O.D. 6.0mm)
12V ACCESSORIES
Current Rating:
8A-12VDC
Housing Material:
ABS (UL94-HB)
Contact Material:
Tip – Nickel Plated Brass
Ground – Nickel Plated Steel
Switch:
SPST Rocker Switch with LED
Wire Size:
SPT-1 Type up to 18 AWG
Fuse:
8A Standard 3AG type (included)
12V SOCKET TO 2 PIN CONNECTOR
This 4” long Adaptor has two pin connector on one end
that connects with any of the 12V power supplies with
interchangeable DC plugs feature. On other end is
standard 12V cigarette lighter socket.
No. 48-1274
12V SOCKET TO 2 POSITION FLAT CONNECTOR
This 10” long Adaptor has 2 position flat trailer harness connector
on one end. On other end is standard 12V cigarette lighter socket.
Allows 12V connection from 2 pin trailer connector.
No. 48-1276
Rating 20A 32V DC, holds 1/4”-1-1/4”
3AG type fuse. Can be used in panel
up to 3/8” thick, mounts in .63”
(16.0mm) mounting hole 94V UL
material, LED indicates when fuse is
blown.
No. 64-2015
SPLASH PROOF HOLDER WITH LED INDICATOR LIGHT
IP66
Rating 20A 12V/24 V DC, holds stan-
dard blade type ATC fuse 14 AWG
loop wire, LED indicates when fuse is
blown.
No. 64-2020
71.5+0.7
85+1
010+0.2
Sizes: Overall Length 3.3”
Body/handle Length 2.8”
O.D. .75”
IP66
NEW PRODUCTS 2012
CIGARETTE LIGHTER PLUG WITH ON-OFF SWITCH
No. 48-790