Lamps

Philmore Manufacturing Company, Inc. div. of LKG Industries of Rockford, Illinois USA
Copyright © 2003-2005 all rights reserved

(link to LED panel lamp assemblies)

INDICATOR LIGHT ASSEMBLIES
Click on photos for larger view. Lamps on this page are either Neon or Incandescent types; for LED, follow this link.

All lamps in this series are for press-fit into .312" diameter holes and have the following features:

Body Material: Nylon
Lens Material: Polycarbonate
Lens Style: Flush diamond (except white lens-flush translucent),
Bezel: None on flush lens, Chrome plated Brass on high lens.
Termination: 6" wire leads Wire gauge: 18awg Wire strip: 1/2"
Panel thickness: .030" min. 125V and 250V lamp assemblies are UL Listed.
All are Non relampable. Made in US or Mexico

SPRING CLIPS
Spring clips for lamp assemblies. In situations where panel hole size and/or panel thickness does not allow a tight fit, a spring clip may be used to secure the assembly. Spring clips are available for both the .312" and .50" diameter lamp. In most installations, they will not be needed. A correctly sized hole will allow a secure installation. 11-2075 5 -PAK SPRING CLIP FOR .312" Indicator light assemblies 11-2375 5 -PAK SPRING CLIP FOR .50" Indicator light assemblies add "B" suffix to the part number for the bulk stock purchase; min, 100 pieces. Philmore Part No.

No. 11-2075 5 -PAK SPRING CLIP FOR .312" Indicator light assemblies
No. 11-2375 5 -PAK SPRING CLIP FOR .50" Indicator light assemblies

INDICATOR LIGHT ASSEMBLIES
.50" HOLE SIZE – 6" LEADS
A quality series of indicator lights, offered with a choice of 6" lead wires or .187" quick-connect tab (See below) electrical terminations. All of the light assemblies on this page are for insertion in a 0.50" diameter round hole in panels with a minimum thickness of .030". The high voltage neon lamps may be connected directly to rated powerline voltages without the need for additional components.
Click on photos for larger view.

SPECIFICATIONS Body Material: Nylon (white)
Lens Material: Polycarbonate
Bezel material: Stainless steel
Terminations: 6" Leads, .50" stripped
Panel Thickness: .030" to .093"
Mounting hole: 0.50" diameter
Types: Neon and Incandescent
Lens Styles: Cylinder diamond, (except white lens-cylinder translucent) two lens heights (see chart, drawings)

INDICATOR LIGHT ASSEMBLIES
.50" HOLE SIZE – .187 "QUICK Connect"

A quality series of indicator lights, offered with a choice of 6" lead wires (see above) or .187" quick-connect tab (below) electrical terminations. All of the light assemblies on this page are for insertion in a 0.50" diameter round hole in panels with a minimum thickness of .030". The high voltage neon lamps may be connected directly to rated power-line voltages without the need for additional components.

New Lamp, Lens Kits

110-120 volts & 12-14 volts

A kit for designers and experimenters to keep on hand at the bench. The kit contains a NEON lamp assembly, with white lens ready to connect to 120 V AC or 12-14 volts and included are three different colored snap-on/snap-off lenses; red, amber, and clear. The unit fits a .50" hole in panels a minimum of .030" thickness. Snap on the lens for the color that you want. Lamp terminals are 0.187" push-on quick-connect terminals (you could solder in a pinch).
Philmore Part no. 11-1990 for 120V AC
Philmore Part no. 11-1992 for 12-14 Volts AC/DC

Back to
HOME Page

Note: all of the lamp assemblies above are UL listed.
Philmore also stocks a non-UL line of good quality; see the Philmore catalog for further information.