TELEPHONE WALL PLATES, modular type
PART OF PHILMORE’S TELEPHONE ACCESSORIES
INCLUDE WALL PLATES. FOR OTHER TELEPHONE ACCESSORIES,
PLEASE CONSULT THE PHILMORE INDEX PAGE UNDER THE TELEPHONE CATEGORY.

NOTE: Philmore wall plates are always supplied with mounting screws of a matching color.
 

TELEPHONE AND TV WALL PLATES

For the two connections found most in the home: telephone and television. The plates have an "F-81" connector, which is a "feedthru". A male "F" connector, which is the familiar screw-on cable connector can be attached at the back of the plate and the front as well. This insures a very high quality (low loss) path for the television signals whether cable TV or from an antenna system.
    The other jack is the familiar 4-pin telephone "modular" connector. The plate is available in popular colors and also the special "mid-size" plate which is 3-1/8" by 4-7/8".

Note: Philmore has a complete series of Wall Plates for use in telephone only applications as we as for HDTV and other applications. See the Wall Plate Index for other sections with Wall Plates.

MODULAR TELEPHONE WALL PLATES, single jack.

Made to fit standard electrical outlet boxes, attractive plates and supplied in colors that match industry standards. All plates are UL and CSA listed and supplied with matching (color) mounting screws. NOTE: Bulk quantities may be purchased by adding a "B" to the end of nearly any Philmore part number. Ask your local distributor about minimum quantities for bulk if you think that you qualify. Also be sure to note that some plates are supplied in INSTALLER TEN PACKS.

PLATES with FOUR CONDUCTOR JACKS

mid-sized and the dimensions are 3-1/8" by 4-78"
===
PLATES with SIX CONDUCTOR JACKS

===

PLATES with EIGHT CONDUCTOR JACKS

MODULAR TELEPHONE WALL PLATES, dual jacks.
These are the same style wall plates as above but with two jacks for
those with two telephone lines. Or, you could connect the two jacks together
in order to have a jack for the telephone and another for the computer or fax.
With mounting screws.

Dual wall plates with FOUR CONDUCTOR JACKS

mid-sized and the dimensions are 3-1/8" by 4-78"
===

Dual wall plates with SIX CONDUCTOR JACKS

===

Dual wall plates with EIGHT CONDUCTOR JACKS

DSS WALL PLATES
Jacks for the telephone as well as satellite or cable TV or antenna system. Two gold plated F connectors (F-81 feed thru type) and a four conductor modular telephone jack.

OUTDOOR MODULAR TELEPHONE JACK
 

Flush mount, weatherproof RJ11/RJ14.
Mounts in standard electrical outlet box. Four conductor jack.

Part no. TWP67 Weatherproof Jack

VOICE AND DATA WALLPLATE
Wall plate with one telephone six conductor jack
and one data eight conductor jack.

Part no. TWP68 Ivory Voice/Data Wall plate
Part no. 75-3682 White Voice/Data Wall plate

WALL PHONE MODULAR JACKS
Industry standard design to fit on a standard electrical junction box
or flush/flat on the wall surface. Supports for supporting the telephone are molded into the wall plate. Wire connections are via screw terminals.
Four conductor and six conductor jacks are physically the
same size; two less positions are wired in the four conductor version.

FOUR CONDUCTOR WALL JACKS

SIX CONDUCTOR WALL JACKS

Stainless Steel
WALL PHONE MODULAR JACKS
 The photo does not show it well, but the plate is a brushed stainless steel, bright silver in colour. An industry standard design to fit on a standard electrical junction box
or flush/flat on the wall surface. Supports for supporting the telephone are molded
into the wall plate. Wire connections are via screw terminals.
Four conductor and six conductor jacks are physically the
same size; two less positions are wired in the four conductor version.
 

Part no. TWP69 Stainless steel 4-conductor plate
Part no. 75-669 Stainless steel 6-conductor plate.

Extra side-jack, WALL PHONE
MODULAR JACKS
This wall plate is fundamentally the same item as the plates at the top of this page, but they have an additional jack on the side (not visible in this photo) for connecting a computer, fax etc. to the same phone line as the telephone.
Industry standard design to fit on a standard electrical junction box
or flush/flat on the wall surface. Supports for supporting the telephone are molded into the wall plate. Wire connections are via screw terminals.

Part no. TWP58 IVORY color, 4-conductor plate.
Part no. TWP58V WHITE color, 4-conductor plate.

Part no. 75-6252 Ivory color 6-conductor plate.
Part no. 75-7253 White color 6-conductor plate.

DECEP STYLE WALL PLATES

DECEP might mean "deception"; the plate is all one piece but appears to be a designer, two-piece plate as in above. You can also find this style in the Television wall plates section if you like the look or want to match those below. Available in two colors and in installer ten packs for convenience.

DECEP wall plate for a single telephone

These are four conductor plates with screw connections. Note that all Philmore wall plates include matching color mounting screws (other vendors may not do this, and supply nickel color screws.)

Part no. TWP40 Ivory DECEP Plate
Part no. TWP40V White DECEP Plate

=======

DECEP wall plate for two telephones.

Part no. TWP72 Ivory Dual DECEP Plate
Part no. TWP72V White Dual DECEP Plate.

Both are four conductor plates with screw connections. Matching screws for mounting are included (always with Philmore wall plates).

========

DECEP wall plate for One Telephone & TV "F" connector.

The telephone connector is a standard, 4-conductor jack. The "F" connector for TV cable, antenna system etc. is an "F" feed through, or "F-81 coupler. The coupler will accept an F connector on each side for loss free connections.

Both are four conductor plates with screw connections. Matching screws for mounting are included (always with Philmore wall plates).

Part no. TWP10 Ivory DECEP Plate for TV & telephone.
Part no. TWP10V White DECEP Plate for TV & telephone.

 back to Philmore New Products 2006 Index page.
Link to the Philmore-Datak Home page.
Link to the Philmore Index page

PHILMORE MANUFACTURING COMPANY is a division of LKG INDUSTRIES Inc. of Rockford, Illinois
all pages are copyright LKG Industries Inc. and may not be reproduced without permission.