Ham Stuff

Philmore Manufacturing Company, Inc. div. of LKG Industries of Rockford, Illinois USA
Copyright © 2003-2005 all rights reserved

HAM STUFF
Welcome Amateur Radio operators; especially the experimenters. Thanks to all of you for your public service over the years. Philmore and Datak divisions of LKG Industries have thousands of items that would be of particular interest to the Ham, but there are some items that are of possible interest ONLY to Ham’s. Take a look at the kits section link below, for example.

Connectors, for RF, Audio, DIN and other connectors.

(for Hams Only) HAM, SWLer Electronic Kits receivers, VFO’s, RF amp etc.

Microphones: PTT Hand mike and SWR bridge, miscellaneous.

PROTOBOARDS for the experimenter.

KITS for Ham radio, including receivers and VFO’s

Index for all PHILMORE products linked HERE (thousands of items)
Index for all DATAK products HERE (printed circuit items)

RG-8X Jumper Cables, molded assemblies
SMA to UHF Adaptor cables for HT’s

RG8X 50 ohm Coax Jumpers

Recommended for HF commercial, ham, and CB use. Smaller than RG-8, but with specs nearly equal, these jumpers will make RG8X has outstanding characteristics and is 1/3 the diameter of RG8!

SMA to UHF HT Adaptor Cable

For hand-held Ham or Business Transceivers (HT) with SMA antenna connectors; adapts the antenna connection to a UHF female for connection to mobile or base antennas with a PL-259 termination. The cable is 16” long miniature 50 ohm coaxial cable. Using an adaptor cable will help to reduce strain on the radio’s SMA antenna jack.

SMA to UHF Adaptor Cable…………Philmore no. CA740