Loctite

Philmore Datak Pfanstiehl Crankin’Power

Now in stock for sale at Philmore distibutors’ locations, all of the Loctite adhesives and sealants needed in the electronics industry for assembly, and for repair. See our distributor page to find one near you.

Duro SUPER GLUE, a super strong and fast drying cyanoacrylate adhesive with a thousand uses. Clear and permanent, bonds in just seconds (15-30 seconds). Two 2-gram tubes per package.
Order part no. LT-81742

Duro GEL Super Glue, another super glue but in a Gel form that will not run or drip during application. Gel is the best choice for use on porous materias (wood, paper, cork etc.) because if fills voids to maximize glued surfaces. Bonds (clear) in about 15 to 30 seconds. The package contains two 2-gram tubes.
Order part no. LT-81954

LOCTITE Quicktite® Super Glues.
This is a premium series of adhesives, far superior to ordinary Super Glues (cyanoacrylates). These glues work faster and are far stonger, due to a patented additive not available anywhere else.

Quicktite® Super Glue liquid .18oz. (5 gm) bottle. Part no. LT-21309
Quicktite® Brush-on liquid .18oz. (5gm) bottle.     Part no. LT-26441
Quicktite® Super Glue Gel .14oz. (4gm.) bottle.     Part no. LT-30379
Quicktite® Super Glue Liquid .14oz. (4gm)tube       Part no. LT-30622
Quicktite® Super glue Pen .07oz. (2gm) pen.          Part no. LT-82192
Quicktite® Super glue Gel .07oz. (2gm) tube.       Part no. LT-82196

LOCTITE Threadlocker. Famous for thread- locking products, the following LOCTITE products are industry standards used throughout industry and during repairs. These products are used to "lock" threaded parts and also to serve as an anti-tamper marker. The "Blue" is considered to be removable, the "red" is high-strength.

Threadlocker medium (blue) #242 .20 fl. oz. Part no. LT-24206
Threadlocker medium (blue) #242 1.2 fl oz. Part no. LT-24240
Threadlocker High Strength(red)#271 .20 fl oz. Part no. LT-27100

LOCTITE EPOXY. Epoxy is a two-part adhesive system, neither part hardens until the two are mixed in a 50-50% mixture which triggers a chemical reaction. Epoxies fill well and tend to be far stronger than traditional glues and highly resistant to solvents and they are waterproof under most circumstances. Use on metal, tile, wood, glass or plastics.

No-mess EPOXY in POXY-POUCHES.
No mess pouches, the two Epoxy components are MIXED inside pouches which should be kneeded for ten to fifteen seconds. The pouch is then cut open and the Epoxy is ready to apply. There ar four (4) pouches per package, each is four grams in size.
Poxy Pouches (4-per) package Part no. LT-82515

EPOXY in tubes and syringes.
Solvent resistant, water proof and bonds to metals, glass, plastic wood, ceramic and tiles. The LT-81501 syringe package dispenses each component at the same rate, assuring perfect proportions during mixing.
The tubes no. LT-81502 provide a larger quantity and each should be mixed half-and-half. Both packages are the same, high-strength adhesive.

Epoxy in syringe dispenser package .85fl oz. Part no. LT-81501
Epoxy in tubes, .5fl oz tubes (x2) Part no. LT-81502

More LOCTITE products to follow…..